VV022001A12

【Product Name】Suturing(Tissue) Forceps

【Model and Specification】

Angled form

【Product structure and composition】

It consists of a pair of blades with overlapping tails. Made of stainless steel. Non-sterile delivery.

【Intended use】

For holding ocular tissue, intraocular foreign bodies or instruments.

【contraindication】

1. People with allergy to stainless steel should not use this product.

2. Non-sterile product, must be sterilized before use.

【Warnings and precautions】

1. Check whether the package is intact before use, and stop using it if there is any damage.

2. Please check the appearance quality of the product before use, and stop using if there are burrs, cracks and other defects.

3. This product is non-sterile and must be cleaned and sterilized before use in accordance with the instructions.

4. The use of this product should comply with national medical regulations.

5. Postoperative instruments should be cleaned and sterilized according to the disinfection instructions before use.

【Storage and transportation conditions】

Stored and transported in a non-corrosive gas, well-ventilated, clean and dry environment with a relative humidity of not more than 80%, a temperature of -10°C~+40°C.

【Expected service life】

The service life of this product is 5 years (the service life refers to the service life under normal storage and transportation conditions). If the product has defects such as rust and deformation, it should be stopped using immediately.

【Cleaning and disinfection】

This product needs to be cleaned and sterilized before use.

Cleaning steps:

1. After the operation, wipe off the blood on the surface of the instrument with gauze, and put it into the cleaning solution immediately for soaking for 10 minutes.

2. Use a soft brush to clean the surface and gap of the product.

3. Rinse the product with purified water or distilled water for at least 3 minutes.

4. Use a clean and dry gauze to dry the surface of the product.

Sterilization methods:

Pre-vacuum pressure steam sterilization: temperature 134°C, maintained for 4 minutes, pressure 0.22Mpa.

Pulsating vacuum pressure steam sterilization: temperature 134°C, maintained for 4 minutes, pressure 0.22Mpa.

【Manufacture Information】

Manufacturer: VisionVentions LLC

【Address】

1178 Broadway, 3rd Floor #1166, New York, NY 10001, USA

【Phone】

+1 425 753 0833

【Email】

info@visionventions.com

【Website】

https://www.visionventions.com

【Document number】

IFU-VV022001A12 Rev. A